MU 2000 D / 1800 E
■ Both models are compact, high-performance continuous mixers.
■ When reducing, mixing and aerating the base product, water can be simultaneously added to the material.
■ If the machines are used for turning material, then a throughput rate of up
to 350 m³ / h can be realised.
■ Operation of the turning and mixing machine is comparable to that of a manure spreader, except it is driven by a diesel or electric engine.
■ The MU 1800 E is manufactured as a stationary machine, and is perfect for
integrating into a production sequence in a plant.
■ The optional chassis for speeds of up to 80 km/h allows the MU 2000 S to be used in several places. Efficient operation in small and narrow spots is possible with a comprehensive range of additional equipment:
■ Retractable drawbar for loading from the front and “overhead”
■ Hydraulic raising of hopper, with an angle of up to 14°
■ Spherical pivot bearings enabling a maximum swivelling angle of 20º on both sides
■ Outfeed conveyor
■ Hydraulic traction drive unit
■ Hydraulic hopper flaps
■ Adjustable tearing ridge
When stationary, the turning and mixing machine is used as a “dispensing silo”. The hopper volume can be adjusted according to the conditions and has a maximum value of 20 m².
■ The robust dispensing drums of the machines ensure a uniform rate of
material discharge and sets up ideal starting conditions for the subsequent
screening and/or inspection procedures. At the same time the bio-waste
is gently reduced.
■ All free-swinging tools at the mixing drum are very robust and can withstand
impact from foreign matter well; they can be replaced individually using a few handles.