380
THROUGHPUT
(lcm/h)
625
Power
(HP)
22
WEIGHT
(t)
FLEXIBLE IN ANY MATERIAL
The BA 926 shredder is the ideal solution for companies that want to produce biomass fuels in addition to composting or biogas substrate processing. The range of processable raw materials extends from green waste to bark, old wood, logs, and roots. The material all-rounder is available with either 530 hp or 625 hp and can be equipped with free-swinging or stationary tools, depending on the application. The unique TwinGear system allows quick changeover between chipping and shredding inserts at the touch of a button.
The BA 926 Series
BA 926
BA 926 Tiger
BA 926 E
Uniquely good
JENZ biomass processors are the ideal choice for companies that value efficiency, safety and convenience. They achieve uniform material quality, are economical in fuel consumption and reduce the burden on drivers. These shredders are also durable with a high tractive force and offer unique flexibility: One rotor for everything.
easy2
Control System
TwinGear
System
IPS Impact Protection System
DIP Roller Pressure System
Screen basket replacement in under 10 minutes
GFA Draw-In control system
One rotor for everything
Operator Information System
Neodym overbelt magnet
DISCOVER ADDITIONAL HIGHLIGHTS
Mode Selecting System
The machine has three preset shredding modes that can be adjusted depending on the source material. For example, green waste can be assigned a separate mode, which is then called up at the push of a button. This saves time and enables even inexperienced operators to make optimum use of the machine.
JES
Standby ModE
The JES (JENZ Energy Saver) mode can shut down the engine to idle at the push of a button if work is interrupted. This stops the conveyor belt and the intake. To continue work, switch back to operation by pressing a button and restart the system.
REMOTE DIAGNOSTICS
To ensure smooth operation of JENZ machines, log data can be transmitted to JENZ on a daily basis. These data help to detect anomalies more quickly and, in the event of an error message, support can be provided quickly and reliably.
Controlled
intake
The lower intake roller is positioned so that logs and roots in particular are fed to the rotor in controlled manner. This ensures uniform chip quality and smooth machine operation.
SPILLOVER BELT
Das serienmäßige Förderband unterhalb des Rotors fängt das Leckmaterial auf und befördert es zum Austragsband. Dadurch sind stationäre Einsätze problemlos möglich. Um die Siebfläche des BA 926 zu vergrößern, kann ein Siebboden mit Siebblechen anstelle des Späneleitblechs eingebaut werden.
Smart HydraulicS
Intelligent hydraulic control allows precise adjustment of the machine to the material and the desired discharge. This ensures high processing quality and maximum efficiency. Diagnostic valves offer easy fault diagnosis - both for the operator and for JENZ Service.
The discharge conveyor can be laid completely flat for ergonomic maintenance access. In addition, handles and steps provide safe access to the rotor. The large machine stand offers sufficient space for maintenance work.
The striker rod pulling device is electro-hydraulically controlled and can be operated with the push of a button. This allows the striker rod to be pulled out without force, making it easier to replace the tools on the rotor.
THE BA 926 – ONE SERIES, NUMEROUS OPTIONS
 BA 926 |  BA 926 Tiger |  BA 926 E | |
Performance | |||
| Garden cuttings (lcm/h) | 360 | 360 | 360 |
| Bark (lcm/h) | 380 | 380 | 380 |
| Scrape wood (lcm/h) | 260 | 260 | 260 |
| Stumps (lcm/h) | 180 | 180 | 180 |
Draw-in | |||
| Draw-in width (mm) | 1500 | 1500 | 1500 |
| Draw-in height (mm) | 900 | 900 | 900 |
| Free loading length (mm) | 4250 | 4250 | 4250 |
| "Silo capacity (m3) " | 7,5 | 7,5 | 7,5 |
Grinding unit | |||
| Number of hammers | 32 | 32 | 32 |
| Rotor diameter | 1040 | 1040 | 1040 |
Conveyor outfeed | |||
| Maximum drop height (mm) | 5100 | 4900 | 3625 |
Main drive | |||
| Diesel motor | MTU OM 471 (opt. MTU OM 473) | MTU OM 471 (opt. MTU OM 473) | |
| Power (kW/hp) | 390/530 (opt. 460/625) | 390/530 (opt. 460/625) | |
| AdBlue | yes | yes | |
| Emission stage | Stufe V | 5 | |
| Displacement (l) | 12,8 (opt. 15,6) | 12,8 (opt. 15,6) | |
| Electric motor | IP55, 400V, 50Hz | ||
| Power (kW) | 200 | ||
Chassis | |||
| Top speed (km/h) | 80 | 3 | |
| Chassis version | Central axle trailer | Caterpillar track | |
Weight | |||
| Weight in t * equipment-dependent | 22 | 24,5 | 19 |
| Permitted axle load (t) | 24 | ||
| Permitted support load (t) | 1,5 | ||
| Permitted total weight (t) | 25,5 | ||
Transport dimensions | |||
| Dimensions transport position* (LxWxH in m) * equipment-dependent | 10,09 x 2,55 x 4,00 | 8,12 x 3,00 x 3,80 | 10,90 x 2,54 x 4,00 |